Shop | STASTO Automation

wafer type; body cast iron EN-GJL-250/ductile iron EN-GJS-500-7; gate AISI 304; soft sealed EPDM; packing PTFE-synthetic/EPDM; screws stainless steel; nominal flange pressure PN10; unidirectional sealed; voltage 400V/3/50Hz; medium temperature -5...+90°C

knife gate valve with electric actuator series A1ED

wafer type; body AISI 316; gate AISI 316; soft sealed EPDM; packing PTFE-synthetic/EPDM; nominal flange pressure PN10; unidirectional sealed; voltage 400V/3/50Hz; medium temperature -5...+90°C

knife gate valve with electric actuator series A1ED

suitable for pneumatic cylinder for knife gate valve series A, AB, AD, F, L and U; NBR; without piston

seal kit

wafer type; body cast iron EN-GJL-250; gate Hardox 600; soft sealed Flucast-R; with reinforced fixing ring; packing PTFE-synthetic/EPDM/scraper; nominal flange pressure PN10; sealed in both directions; control pressure 5,5...8bar; prepared for 2 mechanical switches MSU01

gate valve with double acting pneumatic actuator series ABZ1

NC; body stainless steel AISI 316; seal PTFE; weld ends according to DIN 11850 row 2; for gaseous media; closing with flow; medium temperature -30...+170°C

pneumatically operated seat valve series SE01-D-ST

NC; body stainless steel AISI 316; cap plastic; seal PTFE; weld ends according to DIN 11850 row 2; for gaseous media; closing with flow; medium temperature -30...+135°C

pneumatically operated seat valve series SE18-D-ST

directly operated; body aluminum; aluminum flange with steel socket; tube natural rubber food safe; control pressure 1,8...2,5 bar higher than effective pressure; medium temperature -10...+80 °C

pinch valve series VF

suitable for pneumatic cylinder for knife gate valve series A, AB, AD, F, L and U; NBR

piston

suitable for pneumatic cylinder for knife gate valve series A, AB, AD, F, L and U

piston-rod

wafer type; body cast iron EN-GJL-250; gate AISI 304; soft sealed EPDM; packing PTFE-synthetic/EPDM; screws stainless steel; nominal flange pressure PN10; unidirectional sealed; control pressure 5,5...8bar; medium temperature -5...+90°C

knife gate valve with double acting actuator series L1N

directly operated; connection female thread; tube EPDM food safe white; control pressure 1,8...2,5 bar higher than effective operating pressure; medium temperature -10...+120 °C

pinch valve series PI08

wafer type; body cast iron EN-GJL-250; gate AISI 304; packing PTFE-synthetic/EPDM; screws stainless steel; nominal flange pressure PN10; sealed in both directions; control pressure 5,5...8bar; prepared for 2 inductive limit switches M18

knife gate valve with double acting actuator series AB1N

wafer type; length according to EN558−1R20; body ductile iron EN-GJS-400-15 epoxy coated; disc AISI 316; shaft AISI 430; liner EPDM; nominal flange pressure PN10/16/ANSI150; single acting actuator; control pressure 5,5...8bar; medium temperature -10...+130°C; pressure range 0...10bar; silicone-free

butterfly valve with pneumatic actuator series BUW6-DSE-S2-S

wafer type; length according to EN558−1R20; body; disc and shaft AISI 316; liner NBR; nominal flange pressure PN10/16/ANSI150; double acting actuator; control pressure 5,5...8bar; medium temperature -10...+100°C; pressure range 0...10bar

butterfly valve with pneumatic actuator series BUW6-SSNS-D2

wafer type; length according to EN558−1R20; body aluminum, disc AISI 316; shaft AISI 430; liner NBR; nominal flange pressure PN10/16/ANSI150; medium temperature -10...+100°C; pressure range 0...10bar

butterfly valve with bare shaft series BUW6-ASN-D2

suitable for knife gate valve series AZ, ABZ, ADZ, FZ, LZ and UZ

spare cylinder

wafer type; double eccentric; length according to EN558−1R20; body and disc AISI 316, shaft AISI 630; seat RTFE; medium temperature -10...+230°C; single acting actuator; control pressure 5,5...8bar

butterfly valve with pneumatic actuator series BUW9-SSRS-S

ATEX II 2 G/D Ex h X; wafer type;double eccentric; length according to EN558−1R20; body and disc AISI 316, shaft AISI 630; seat RTFE; medium temperature -10...+230°C; single acting actuator; control pressure 5,5...8bar

butterfly valve with pneumatic actuator series BUW9-SSRS-S-A

AISI 304 hard chrome plated; suitable for ABZ1-N3HX61A

scraper ring series SR

wafer type; double eccentric; length according to EN558−1R20; body, disc AISI 316; shaft AISI 630; seat RTFE; double acting actuator; control pressure 5,5...8bar; medium temperature -10...+230°C

butterfly valve with pneumatic actuator series BUW9-SSRS-D

wafer type; body AISI 316; gate AISI 316; soft sealed EPDM; packing PTFE-synthetic/EPDM; nominal flange pressure PN10; unidirectional sealed; control pressure 5,5...8bar; medium temperature -5...+90°C; prepared for 2 mechanical switches MSU01A

knife gate valve with double acting actuator series A1N

wafer type; body AISI 316; gate AISI 316; soft sealed PTFE; packing PTFE; nominal flange pressure PN10; unidirectional sealed; control pressure 5,5...8bar; medium temperature -20...+180 °C

knife gate valve with double acting actuator series A1N

wafer type; body cast iron EN-GJL-250; gate Hardox 600; soft sealed Flucast-R; with reinforced fixing ring AISI 304 hard chrome plated; packing PTFE-synthetic/EPDM/scraper; nominal flange pressure PN10; sealed in both directions; control pressure 5,5...8bar; prepared for 2 mechanical switches MSU01

gate valve with double acting pneumatic actuator series ABZ1

wafer type; body AISI 316; gate AISI 316; metal sealing; sliding guide bronze; gate and seat reinforced; packing graphite; nominal flange pressure PN10; unidirectional sealed; medium temperature max. +250°C; control pressure 5,5...8bar

knife gate valve with double acting actuator series K1N

female thread; body brass; disc PEI (Ultem 1000); pressure range 0...16bar; medium temperature -10...+130°C; double acting actuator; control pressure 6...8bar

butterfly valve with pneumatic actuator series BU900-D0

wafer type; length according to EN558−1R20; body ductile iron EN-GJS-400-15 epoxy coated; disc AISI 316; shaft AISI 430; liner EPDM; nominal flange pressure PN10/16/ANSI150; medium temperature -10...+130°C; pressure range 0...6bar

butterfly valve with electrical actuator series BUW2-DSE-0

wafer type; length according to EN558−1R20; body ductile iron EN-GJS-400-15 epoxy coated; disc AISI 316; shaft AISI 430; liner NBR; nominal flange pressure PN10/16/ANSI150; double acting actuator; control pressure 5,5...8bar; medium temperature -10...+100°C; pressure range 0...10bar

butterfly valve with pneumatic actuator series BUW6-DSN-D2

wafer type; length according to EN558−1R20; body ductile iron EN-GJS-400-15 epoxy coated; disc AISI 316; shaft AISI 430; liner EPDM; nominal flange pressure PN10/16/ANSI150; medium temperature -10...+130°C; pressure range 0...16bar

butterfly valve with electrical actuator series BUW6-DSE-01

NC; connection parts AISI 316L; tube FKM; medium temperature -10...+130°C

pinch valve series PI03

wafer type; length according to EN558−1R20; body steel; disc and shaft AISI 316; liner EPDM; nominal flange pressure PN10/16/ANSI150; medium temperature -10...+130°C; pressure range 0...10bar

butterfly valve with electrical actuator series BUW6-CSES-0

lug type; length according to EN558−1R20; body ductile iron EN-GJS-400-15 epoxy coated; disc AISI 316; shaft AISI 430; liner FKM; single acting actuator; control pressure 5,5...8bar; medium temperature -10...+200°C; pressure range 0...10bar

butterfly valve with pneumatic actuator series BULG-S, BULC-S

wafer type; length according to EN558−1R20; body ductile iron EN-GJS-400-15 epoxy coated; disc AISI 316; shaft AISI 430; liner FKM; nominal flange pressure PN10/16/ANSI150; single acting actuator; control pressure 5,5...8bar; medium temperature -10...+200°C; pressure range 0...10bar

butterfly valve with pneumatic actuator series BUW6-DSV-S2

wafer type; length according to EN558−1R20; body ductile iron EN-GJS-400-15 epoxy coated; disc AISI 316; shaft AISI 430; liner FKM; nominal flange pressure PN10/16/ANSI150; single acting actuator; control pressure 5,5...8bar; medium temperature -10...+200°C; pressure range 0...10bar; incl. inspection certificate EN-10204-3.1; for material, pressure and tightness

butterfly valve with pneumatic actuator series BUW6-DSV-S2-3C

wafer type; body cast iron EN-GJL-250; gate AISI 304; packing PTFE-synthetic/EPDM with copper scraper; screws stainless steel; nominal flange pressure PN10; sealed in both directions; control pressure 5,5...8bar; prepared for 2 inductive limit switches M18

knife gate valve with double acting actuator with emergency handwheel series AB1NE

ATEX II 2 G/D Ex h X; wafer type; length according to EN558−1R20; for abrasive medias (e.g. sand, cement, etc.); body ductile iron EN-GJS-400-15 epoxy coated; disc AISI 316; shaft AISI 430; liner carboxylated NBR; nominal flange pressure PN10/16/ANSI150; double acting actuator ATEX II 2 G/D c T6; control pressure 5,5...8bar; medium temperature -10...+100°C; pressure range 0...6bar

butterfly valve with pneumatic actuator series BUW2-DSC-D-A

wafer type; length according to EN558−1R20; body ductile iron EN-GJS-400-15 epoxy coated; disc AISI 316; shaft AISI 430; liner polyurethane; nominal flange pressure PN10/16/ANSI150; double acting actuator; control pressure 5,5...8bar; medium temperature -10...+90°C; pressure range 0...10bar

butterfly valve with pneumatic actuator series BUW6-DSP1-D2

ATEX II 2 G/D Ex h X; wafer type; length according to EN558−1R20; body ductile iron EN-GJS-400-15 epoxy coated; disc AISI 316; shaft AISI 430; liner polyurethane; nominal flange pressure PN10/16/ANSI150; double acting actuator; control pressure 5,5...8bar; medium temperature -10...+90°C; pressure range 0...10bar

butterfly valve with pneumatic actuator series BUW6-DSP1-D2-A

ATEX II 2 G/D Ex h X; lug type; double eccentric; length according to EN558−1R20; body and disc AISI 316, shaft AISI 630; seat RTFE/inconel 625-graphite; nominal flange pressure PN25; medium temperature -10...+230°C single acting actuator; control pressure 5,5...8bar; fire-safe; ATEX II 2 G/D c TX

butterfly valve with pneumatic actuator series BULV

directly operated; connection flange according to DIN28459; body and flange aluminum; tube natural rubber; control pressure 1,8...2,5 bar higher than effective pressure; medium temperature -10...+80 °C

pinch valve series PI12

wafer type; body cast iron EN-GJL-250/ductile iron EN-GJS-500-7; gate AISI 304; soft sealed EPDM; packing PTFE-synthetic/EPDM; screws stainless steel; nominal flange pressure PN10; sealed in both directions; control pressure 5,5...8bar; medium temperature -5...+90°C

knife gate valve with double acting actuator series AB1N

directly operated; body aluminum; aluminum flange with stainless steel socket; tube natural rubber; control pressure 1,8...2,5 bar higher than effective pressure; medium temperature -10...+80°C

pinch valve series PI02

directly operated; body aluminum; aluminum flange with stainless steel socket; tube natural rubber food-safe FDA-approved; control pressure 1,8...2,5 bar higher than effective pressure; medium temperature -10...+80°C

pinch valve series PI02-WRA

distribution function; 3-way-type; body stainless steel AISI 316; seal PTFE; female thread; medium temperature -30...+200°C; control actuator CA24C 24VAC/DC; control signal 4-20mA; position feedback 4-20mA; 2 limit switch; characteristic linear; with control cone

electrical seat valve series SEC14-CA24C

wafer type; with DVGW certificate for water; length according to EN558−1R20; body ductile iron EN-GJS-400-15 epoxy coated; disc AISI 316; shaft AISI 420; liner EPDM; double acting actuator; control pressure 5,5...8bar; medium temperature -15...+80°C; medium water; pressure range 0...10bar

butterfly valve with pneumatic actuator series BUA-D-DVGW

suitable for pinch valve series PI08

spare tubes

lug type; length according to EN558−1R20; for abrasive medias (e.g. sand, cement, etc.); body EN-GJS-400-15 epoxy coated; disc AISI 316; shaft AISI 430; liner carboxylated NBR; double acting actuator; control pressure 5,5...8bar; medium temperature -10...+100°C; pressure range 0...6bar

butterfly valve with pneumatic actuator series BULI-D, BULB-D

lug type; length according to EN558−1R20; for abrasive medias (e.g. sand, cement, etc.); body EN-GJS-400-15 epoxy coated; disc AISI 316; shaft AISI 430; liner carboxylated NBR; single acting actuator; control pressure 5,5...8bar; medium temperature -10...+100°C; pressure range 0...6bar

butterfly valve with pneumatic actuator series BULI-S, BULB-S

wafer type; body cast iron EN-GJL-250/ductile iron EN-GJS-500-7; gate AISI 304; soft sealed NBR; packing PTFE-synthetic/EPDM; screws stainless steel; nominal flange pressure PN10; sealed in both directions; control pressure 5,5...8bar; medium temperature -5...+90°C

knife gate valve with double acting actuator series AB1N

; suitable for series SE01, SE02, SE03; body brass, bronze; seal EPDM

seal kit

high temperature design; ATEX area 1,21; NC; body stainless steel AISI 316; seal PTFE; female thread; for gaseous media; closing with flow; medium temperature -30...+200°C; incl. splash water protection

pneumatically operated seat valve series SE01-ST-HT

spare body pneumatically operated seat valves

wafer type; double eccentric; length according to EN558−1R20; body steel epoxy coated; disc AISI 316; shaft AISI 630; seat RTFE; double acting actuator; control pressure 5,5...8bar; medium temperature -10...+230°C

butterfly valve with pneumatic actuator series BUW9-CSRS-D

wafer type; double eccentric; length according to EN558−1R20; body steel epoxy coated; disc AISI 316; shaft AISI 630; seat Inconel 625; single acting actuator; control pressure 5,5...8bar; medium temperature -10...+425°C

butterfly valve with pneumatic actuator series BUW9-CSIS-S

wafer type; double eccentric; length according to EN558−1R20; body, disc AISI 316; shaft AISI 630; seat Inconel 625; nominal flange pressure PN10/16/25/ANSI150; single acting actuator; control pressure 5,5...8bar; medium temperature -10...+425°C; pressure range 0...25bar

butterfly valve with pneumatic actuator series BUW9-SSIS-S4

lug type; double eccentric; length according to EN558−1R20; body steel epoxy coated; disc AISI 316; shaft AISI 630; seat Inconel 625; double acting actuator; control pressure 5,5...8bar; medium temperature -10...+425°C

butterfly valve with pneumatic actuator series BUL-CSIS-D

wafer type; double eccentric; length according to EN558−1R20; body steel epoxy coated; disc AISI 316; shaft AISI 630; seat Inconel 625; double acting actuator; control pressure 5,5...8bar; medium temperature -10...+425°C

butterfly valve with pneumatic actuator series BUW-CSIS-D

ATEX II 2 G/D Ex h X; wafer type; double eccentric; length according to EN558−1R20; body steel epoxy coated; disc AISI 316; shaft AISI 630; seat RTFE; double acting actuator ATEX II 2 G/D c T6; control pressure 5,5...8bar; medium temperature -10...+230°C

butterfly valve with pneumatic actuator series BUW9-CSRS-D-A

wafer type; double eccentric; length according to EN558−1R20; body steel epoxy coated; disc AISI 316; shaft AISI 630; seat RTFE; double acting actuator; control pressure 5,5...8bar; medium temperature -10...+230°C

butterfly valve with pneumatic actuator series BUW9-CSRS-D

wafer type; double eccentric; length according to EN558−1R20; body, disc AISI 316; shaft AISI 630; seat RTFE; medium temperature -10...+230°C

butterfly valve with electrical actuator series BUW9-SSRS-0

wafer type; double eccentric; length according to EN558−1R20; body steel epoxy coated; disc AISI 316; shaft AISI 630; seat RTFE; medium temperature -10...+230°C

butterfly valve with electrical actuator series BUW9-CSRS-0

;ATEX II 2 G/D Ex h X; wafer type; double eccentric; length according to EN558−1R20; body, disc AISI 316; shaft AISI 630; seat Inconel 625; double acting actuator ATEX II 2 G/D c T6; control pressure 5,5...8bar; medium temperature -10...+425°C; pressure range 0...25bar

butterfly valve with pneumatic actuator series BUW9-SSIS-D4-A

wafer type; double eccentric; length according to EN558−1R20; body steel epoxy coated; disc AISI 316; shaft AISI 630; seat RTFE; single acting actuator; control pressure 5,5...8bar; medium temperature -10...+230°C

butterfly valve with pneumatic actuator series BUW9-CSRS-S

lug type; double eccentric; length according to EN558−1R20; body, disc AISI 316; shaft AISI 630; seat RTFE; medium temperature -10...+230°C; single acting actuator; control pressure 5,5...8bar

butterfly valve with pneumatic actuator series BUL-SSRS-S2

ATEX II 2 G/D Ex h X; lug type; double eccentric; length according to EN558−1R20; body, disc AISI 316; shaft AISI 630; seat inconel 625; medium temperature -10...+425°C; single acting actuator ATEX II 2 G/D c T6; control pressure 5,5...8bar

butterfly valve with pneumatic actuator series BUL-SSIS-S2-A

ATEX II 2 G/D Ex h X; lug type;double eccentric; length according to EN558−1R20; body, disc AISI 316; shaft AISI 630; seat inconel 625; medium temperature -10...+425°C; double acting actuator ATEX II 2 G/D c T6; control pressure 5,5...8b

butterfly valve with pneumatic actuator series BUL-SSIS-D2-A

ATEX II 2 G/D Ex h X; wafer type;double eccentric; length according to EN558−1R20; body steel epoxy coated; disc AISI 316; shaft AISI 630; seat Inconel 625; single acting actuator ATEX II 2 G/D c T6; control pressure 5,5...8bar; medium temperature -10...+425°C

butterfly valve with pneumatic actuator series BUW9-CSIS-S-A

NO; lug type; length according to EN558−1R20; body ductile iron EN-GJS-400-15 epoxy coated; disc AISI 316; shaft AISI 430; liner EPDM; single acting actuator; control pressure 5,5...8bar; medium temperature -10...+130°C; pressure range 0...10bar

butterfly valve with pneumatic actuator series BULG-DSE-T22, BULC-DSE-T22

width 22mm

coil type C015

connector size 22mm; form B-ISO

connector series C004

wafer type; body cast iron EN-GJL-250/ductile iron EN-GJS-500-7; gate AISI 304; soft sealed EPDM; packing PTFE-synthetic/EPDM; screws stainless steel; nominal flange pressure PN10; unidirectional sealed; control pressure 5,5...8bar; medium temperature -5...+90°C; incl. 2 mechanical limit switches OPEN/CLOSED

knife gate valve with double acting actuator series A1N2H2-5-2EM-B

wafer type; body cast iron EN-GJL-250/ductile iron EN-GJS-500-7; gate AISI 304; soft sealed EPDM; packing PTFE-synthetic/EPDM; screws stainless steel; nominal flange pressure PN10; unidirectional sealed; control pressure 5,5...8bar; medium temperature -5...+90°C; incl. 2 inductive limit switches OPEN/CLOSED

knife gate valve with double acting actuator series A1N2H2-5-2EM-B

directly operated; connection female thread; connection part POM white; tube natural rubber; control pressure 1,8...2,5 bar higher than effective operating pressure; medium temperature -10...+80 °C

pinch valve series PI08

wafer type; length according to EN558−1R20; body ductile iron EN-GJS-400-15 epoxy coated; disc AISI 316; shaft AISI 316; liner EPDM; nominal flange pressure PN10/16/ANSI150; medium temperature -10...+130°C; pressure range 0...10bar

butterfly valve with electrical actuator series BUW6-DSE-02

NC; connection parts AISI 316L; tube EPDM food safe; medium temperature -30...+95°C

pinch valve series PI03

NO; connection parts AISI 316L; tube EPDM food safe; control pressure has to be adjusted acc. to diagram in data-sheet; medium temperature -30...+95°C

pinch valve series PI04

directly operated; body aluminum; aluminum flange; tube natural rubber; control pressure 1,8...2,5 bar higher than effective pressure; medium temperature -10...+80°C

pinch valve series PI02-RAA

wafer type; body cast iron EN-GJL-250/ductile iron EN-GJS-500-7; gate AISI 304; soft sealed EPDM; packing PTFE-synthetic/EPDM; screws stainless steel; nominal flange pressure PN10; unidirectional sealed; control pressure 5,5...8bar; medium temperature -5...+90°C; prepared for 2 mechanical switches MSU01A

knife gate valve with double acting actuator series A1N2H2-5-PMB

ATEX II 2 G/D Ex h X; lug type; length according to EN558−1R20; body ductile iron EN-GJS-400-15 epoxy coated; disc AISI 316; shaft AISI 430; liner EPDM; single acting actuator ATEX II 2 G/D c T6; control pressure 5,5...8bar; medium temperature -10...+130°C

butterfly valve with pneumatic actuator series BULG-DSE-S22-A, BULC-DSE-S22-A, BULY-DSE-S22-A

NC; wafer type; body cast iron EN-GJL-250/ductile iron EN-GJS-500-7; gate AISI 304; soft sealed EPDM; packing PTFE-synthetic/EPDM; screws stainless steel; nominal flange pressure PN10; unidirectional sealed; control pressure 5,5...8bar; medium temperature -5...+90°C; prepared for 2 inductive limit switches M18

knife gate valves with single acting pneumatic actuator series A1S2H2-5-PIB

NC; wafer type; body cast iron EN-GJL-250/ductile iron EN-GJS-500-7; gate AISI 304; soft sealed EPDM; packing PTFE-synthetic/EPDM; screws stainless steel; nominal flange pressure PN10; unidirectional sealed; control pressure 5,5...8bar; medium temperature -5...+90°C

knife gate valves with single acting pneumatic actuator series A1S2H2-5-B

NC (double acting-compressed air tank); wafer type; body cast iron EN-GJL-250/ductile iron EN-GJS-500-7; gate AISI 304; soft sealed EPDM; packing PTFE-synthetic/EPDM; screws stainless steel; nominal flange pressure PN10; unidirectional sealed; control pressure 5,5...8bar; medium temperature -5...+90°C

knife gate valves with single acting pneumatic actuator series A1S2H2-5-B

NC; wafer type; body cast iron EN-GJL-250/ductile iron EN-GJS-500-7; gate AISI 304; soft sealed EPDM; packing PTFE-synthetic/EPDM; screws stainless steel; nominal flange pressure PN10; unidirectional sealed; control pressure 5,5...8bar; medium temperature -5...+90°C; prepared for 2 mechanical switches MSU01A

knife gate valves with single acting pneumatic actuator series A1S2H2-5-PMB

lug type; double eccentric; length according to EN558−1R20; body steel epoxy coated; disc AISI 316; shaft AISI 630; seat RTFE; medium temperature -10...+230°C; single acting actuator; control pressure 5,5...8bar

butterfly valve with pneumatic actuator series BUL-CSRS-S2

wafer type; body cast iron EN-GJL-250/ductile iron EN-GJS-500-7; gate AISI 304; soft sealed FKM; packing PTFE-synthetic/FKM; nominal flange pressure PN10; unidirectional sealed; control pressure 5,5...8bar; medium temperature 0...+120°C

knife gate valve with double acting actuator series A1N2H3-5V

wafer type; body cast iron EN-GJL-250/ductile iron EN-GJS-500-7; gate AISI 304; soft sealed FKM; screws stainless steel; packing PTFE-synthetic/FKM; nominal flange pressure PN10; unidirectional sealed; control pressure 5,5...8bar; medium temperature 0...+120°C

knife gate valve with double acting actuator series A1N2H3-5V-B

wafer type; body cast iron EN-GJL-250/ductile iron EN-GJS-500-7; gate AISI 304; soft sealed FKM; screws stainless steel; packing PTFE-synthetic/FKM; nominal flange pressure PN10; unidirectional sealed; control pressure 5,5...8bar; medium temperature 0...+120°C; prepared for 2 inductive limit switches M18

knife gate valve with double acting actuator series A1N2H3-5V-PIB

wafer type; body cast iron EN-GJL-250/ductile iron EN-GJS-500-7; gate AISI 304; soft sealed FKM; screws stainless steel; packing PTFE-synthetic/FKM; nominal flange pressure PN10; unidirectional sealed; control pressure 5,5...8bar; medium temperature 0...+120°C; prepared for 2 mechanical switches MSU01A

knife gate valve with double acting actuator series A1N2H3-5V-PMB

NC; body stainless steel AISI 316; seal PTFE; female thread; for gaseous media and liquids; closing against flow; medium temperature -40...+180°C

pneumatically operated seat valve series 21IA.GC

suitable for pneumatic cylinder for knife gate valve series A, AB, AD, F, L and U; consists of seal kit NBR and piston

set of wear parts

wafer type; length according to EN558−1R20; body ductile iron EN-GJS-400-15 epoxy coated; disc and shaft AISI 316; liner PTFE/silicone; nominal flange pressure PN10/16/ANSI150; double acting actuator; control pressure 5,5...8bar; medium temperature -10...+190°C; pressure range 0...10bar

butterfly valve with pneumatic actuator series BUW4-DSTS-D22

ATEX II 2 G/D Ex h; wafer type; length according to EN558−1R20; body ductile iron EN-GJS-400-15 epoxy coated; disc and shaft AISI 316; liner PTFE/silicone; nominal flange pressure PN10/16/ANSI150; double acting actuator ATEX II 2 G/D c T6; control pressure 5,5...8bar; medium temperature -10...+190°C; pressure range 0...10bar

butterfly valve with pneumatic actuator series BUW4-DSTS-D22-A

wafer type; length according to EN558−1R20; body ductile iron EN-GJS-400-15 epoxy coated; disc and shaft AISI 316; liner PTFE/silicone; nominal flange pressure PN10/16/ANSI150; single acting actuator; control pressure 5,5...8bar; medium temperature -10...+190°C; pressure range 0...10bar

butterfly valve with pneumatic actuator series BUW4-DSTS-S22

ATEX II 2 G/D Ex h; wafer type; length according to EN558−1R20; body ductile iron EN-GJS-400-15 epoxy coated; disc and shaft AISI 316; liner PTFE/silicone; nominal flange pressure PN10/16/ANSI150; single acting actuator ATEX II 2 G/D c T6; control pressure 5,5...8bar; medium temperature -10...+190°C; pressure range 0...10bar

butterfly valve with pneumatic actuator series BUW4-DSTS-S22-A

ATEX II 3 G/D; wafer type; body cast iron EN-GJL-250/ductile iron EN-GJS-500-7; gate AISI 304; metal seal with abrasion protection; packing PTFE-synthetic/EPDM; screws stainless steel; nominal flange pressure PN10; unidirectional sealed; control pressure 5,5...8bar; medium temperature -5...+90°C

knife gate valve with double acting actuator series A1N4H1-5-B

wafer type; body cast iron EN-GJL-250/ductile iron EN-GJS-500-7; gate AISI 304; soft sealed EPDM; packing PTFE-synthetic/EPDM; screws stainless steel; nominal flange pressure PN10; sealed in both directions; control pressure 5,5...8bar; medium temperature -5...+90°C; prepared for 2 mechanical switches MSU01A

knife gate valve with double acting actuator series AB1N

wafer type; body cast iron EN-GJL-250/ductile iron EN-GJS-500-7; gate AISI 304; soft sealed EPDM; packing PTFE-synthetic/EPDM; nominal flange pressure PN10; unidirectional sealed; control pressure 5,5...8bar; medium temperature -5...+90°C; prepared for 2 inductive switches MSU03, MSU04, MSU05

knife gate valve with double acting actuator series A1N-PI

directly operated; Tri-Clamp connection according to DIN32676 row A; connection part stainless steel; tube natural rubber; control pressure 1,8...2,5 bar higher than effective operating pressure; medium temperature -10...+80 °C

pinch valve series PI08

DN	length	pressure range	Type	Price
150 mm	60 mm	0...10 bar	A1N2H2-5-150-2EI-B	Not Available For Sale 999999.0 EUR
200 mm	60 mm	0...10 bar	A1N2H2-5-200-2EI-B	Not Available For Sale 999999.0 EUR
50 mm	40 mm	0...10 bar	A1N2H2-5-50-2EI-B	Not Available For Sale 999999.0 EUR
80 mm	50 mm	0...10 bar	A1N2H2-5-80-2EI-B	Not Available For Sale 999999.0 EUR

Login • Register A warm welcome!

My shopping basket

My wishlist

Guest

My shopping basket

My wishlist

my user account

My orders

change profile

Manage payment methods

change password

Sign out

Filters

other materiales - A05

STASTO Store

DN

pressure range

knife gate valve with double acting actuator series A1N2H2-5-2EM-B